SPEND $275 and save 15%. Spend $500 and save 20% ALWAYS

Jonathan Rummel | Ambassador | 1620 Workwear, Inc.

Jonathan Rummel | Ambassador | 1620 Workwear, Inc.

Jonathan Rummel

Hometown: Andover, MA
Tradecraft: Metalsmith
Website: Click here
Social: Instagram  |  Vimeo

Contemporary craftsman, artist, photographer and mountain biker, John wears many hats. Hand Forged Works is his manufacturing facility located in North Andover Massachusetts, that is his pride and joy. He received his training at the iconic artisan guild, called Steeprock. Where under the guidance of such masters as Glen Hartcourt his foundation was built. John proudly credits all the master craftsmen in the US that he has learned from, as he continues his journey as one of the most creative metal workers in the country.

Sizing and Fit


STRETCH FABRICS - Allow for us to make an ergonomically designed and better performing pant that  uses less fabric, meaning less chance of things getting caught on machinery or flapping the the breeze when you're riding your motorcycle to work
MODERN FIT - All 1620 Workwear pants feature a modern fit.  This means our waist fits true to size , slightly slim through the thigh, plenty of room in the crotch and slightly tapered towards the hem. 

Pants Sizing Chart

WAIST MEASUREMENT - Use a measuring tape to measure around your waistline, just above the top of the hip bones. Make sure the tape is snug but not too tight.

INSEAM LENGTH - Grab a pair of pants that fit well and lay them flat on the floor. With a measuring tape, measure the length from the crotch to the bottom of the leg/hem. 


 When in doubt size up, but remember our waistbands stretch for more forgiveness than your traditional work pants.


Our hoodies, shirts and tees have a generous tradesman fit and are slightly longer in length than you may be used to, preventing any unwanted exposure.

Tops Sizing Chart